Back to bandsaw machines
KASTOtec FC 5
Type:
Bandsaw
Grade of automation:
automatic
Cutting range:
up to
530 x 530 mm
KASTOtec FC 5
Fully hydraulic and automatic high-performance bandsawing machine of robust construction, with saw blade moving parallel in horizontal direction, for cutting of round, square and flat material, of tubes and profiles of all qualities, particularly for tool steels and material which is difficult to cut such as titanium, Hastelloy, Inconel etc.
- Sawband guide via hydraulically pretensioned carbide slideways
- Electronic monitoring of the hydraulic blade tension
- Infinitely variable cutting speed, to be adjusted at central control panel
- Fully automatic, rapid height adjustment of the saw unit via light barrier
- Hydraulic horizontal vices, clearance stroke is standard
We are happy to help:

Technical data
KASTOtec FC 5
Metric system | |
---|---|
Form | |
Cutting range
| |
Cutting range | 530 mm / 530x530 mm / 530x530 mm
|
Clamping range | 0-630 mm
|
Smallest dimension to be cut | 10x10 mm
|
Shortest length of residual piece, single cut | 10 mm
|
Shortest remnant length in automatic operation, possible (only if the material has a perfect geometric surface) | 35 mm
|
Shortest cut-off length | 10 mm
|
Shortest remnant length in magazine operation with change of bar, possible only if the material has a perfect geometric surface | 50 mm
|
Smallest size to be cut in magazine operation with change of bar | 20x20 mm
|
Performance characteristics
| |
Total connected load | 25.0 kW
|
Power of saw motor | 15.5 kW
|
Power at running wheel | 14.0 kW
|
Cutting speed infinitely variable with 50 or 60 Hz | 30-300 m/min
|
Automatic material feed length, single stroke | 600 mm
|
Dimensions of saw blade | 7.675x54x1,3 mm |
Imperial and US customary units | |
---|---|
Form | |
Cutting range
| |
Cutting range | 20.86 in / 20.86 x 20.86 in / 20.86 x 20.86 in
|
Clamping range | 0 - 24.80 in
|
Smallest dimension to be cut | 0.39 x 0.39 in
|
Shortest length of residual piece, single cut | 0.39 in
|
Shortest remnant length in automatic operation, possible (only if the material has a perfect geometric surface) | 1.37 in
|
Shortest cut-off length | 0.39 in
|
Shortest remnant length in magazine operation with change of bar, possible only if the material has a perfect geometric surface | 1.97 in
|
Smallest size to be cut in magazine operation with change of bar | 0.79 x 0.79 in
|
Performance characteristics
| |
Connected load | 33.52 HP
|
Power of saw motor | 20.11 HP
|
Power at running wheel | 7.00 HP
|
Cutting speed infinitely variable with 50 or 60 Hz | 98.42 - 984.25 ft/min
|
Dimensions of saw blade | 302.16 x 2.12 x 0.050 in |
We reserve the right to make technical changes.