Back to circlesaw machines
Universal circular saw used in machine shops and serial production alike to cut profiles, tubes and solids.
- Regardless of the number of cuts, orders are processed unmanned in an unmanned operation providing sufficient material is available.
- Easy order programming of the KASTO-saw control ProControl with graphic display of cutting geometry and calculated material amount per order.
- More flexibility with highest efficiency when doing serial cuts
Cutting range 90° with blade diameter 450 mm
7.87 x 3.94 in / 5.51 x 5.51 in / Ø 5.91 in
Cutting range +/- 45° with blade diameter 450 mm
6.30 x 3.15 in / 4.72 x 4.72 in / Ø 5.71 in
Cutting range +/- 60° with blade diameter 450 mm
4.72 x 2.36 in / 3.94 x 3.94 in / Ø 4.53 in
Minimum material height with flat material
Remnant length in automatic cycle at 90°
Remnant length in automatic cycle at 45°
|Mass and height|
Material support hight
Frequency regulated drive (option)
Connected load of coolant pump
Pole changing cutting speed
39.36 / 78.72 ft/min
Cutting speed, infinitely variable (option)
32.80 - 196.80 ft/min
Direct entry of measures up to
Max. clamping power of material feed vice
Max. clamping power of vertical vice
Material feed length, individual cut at 90°
Material feed length, individual cut at 45° approx.
Saw feed speed range
0.39 - 20.47 in/min
Rapid return of the saw blade
Material feed speed
0 - 65.60 ft/min
Diameter of saw blade, special flange: option
Ø 13.78 in
Diameter of saw blade
Ø 15.75 in / 17.72 in
Max. tolerance of straightness
0.47 in / 19.69 ft
We reserve the right to make technical changes.