Back to bandsaw machines

KASTOtec FC 4

Type: Bandsaw
Grade of automation: automatic
Cutting range: up to 16.92 x 16.92 in

KASTOtec FC 4

Fully hydraulic and automatic high-performance bandsawing machine of robust construction, with saw blade moving parallel in horizontal direction, for cutting of round, square and flat material, of tubes and profiles of all qualities, particularly for tool steels and material which is difficult to cut such as titanium, Hastelloy, Inconel etc.

  • Sawband guide via hydraulically pretensioned carbide slideways
  • Electronic monitoring of the hydraulic blade tension
  • Infinitely variable cutting speed, to be adjusted at central control panel
  • Fully automatic, rapid height adjustment of the saw unit via light barrier
  • Hydraulic horizontal vices, clearance stroke is standard
We are happy to help:

Hotline Sales

KASTO Hotline USA

Phone: 724 325-5600

Make an inquiry
Technical data
KASTOtec FC 4
Cutting range
Form
Cutting range
16.92 in / 16.92 x 16.92 in / 16.92 x 16.92 in
Clamping range
0 - 16.92 in
Smallest dimension to be cut
0.39 x 0.39 in
Shortest length of residual piece, single cut
0.39 in
Shortest remnant length in automatic operation, possible (only if the material has a perfect geometric surface)
1.37 in
Shortest cut-off length
0.39 in
Shortest remnant length in magazine operation with change of bar, possible only if the material has a perfect geometric surface
1.97 in
Smallest size to be cut in magazine operation with change of bar
0.79 x 0.79 in
Mass and height
Length with material feed length 600 mm approx.
85.27 in
Length with material feed length 1500 mm approx.
124.64 in
Length with material feed length 3000 mm approx.
179.72 in
Width with chip conveyor approx.
185.70 in
Height approx.
102.44 in
Total weight with material feed length 600 mm
10,692 lbs
Total weight with material feed length 1500 mm
11,794 lbs
Total weight with material feed length 3000 mm
12,456 lbs
Material support hight
37.40 in
Performance characteristics
Connected load
33.52 HP
Power of saw motor
20.11 HP
Power at running wheel
7.00 HP
Cutting speed infinitely variable with 50 or 60 Hz
98.42 - 984.25 ft/min
Saw blade dimensions
268.89 x 1.61. 0.05 in
We reserve the right to make technical changes.

Kompletter Materialfluss automatisiert

Das kombinierte Lager-Säge-Roboter-System von KASTO ermöglicht der Stahlhandelsgesellschaft Weser Stahl einen komplett mannlosen Materialfluss, vom Einlagern des Rohmaterials bis zur Versandbereitstellung, der gesägten Abschnitte.

Zur Referenz Weser Stahl

TOP