KASTOmiwin A 4.6
KASTOmiwin A 4.6
Two-column guided band saw for straight and miter cutting in steel trade and workshop.
This two-column guided band saw for single cuts and miter jobs (-45 ° / + 60 °) is characterized by a frequency-controlled, infinitely adjustable blade speed (12-150 m / min), a cutting strip, which is turning with the saw head, of wear-resistant spring steel as Material support, an electric motor-driven saw feed and a hydrau-lic material clamping. The hydraulic material clamping is automatically hydraulically shifted depending on the positive or negative cutting angle.
All advantages at a glance::
- Fast, accurate material feed with gear rack
- No wear of the material support due to swinging support table right next to the sawblade
- Low burr formation
- Exact parallel material clamping due to movable vice. Parts can’t jam (Wedge).
- Optimized cutting times through KASTOrespond
- Constant saw feed by means of ball screw spindle
- Electrically powered chip removal brush
- Low torsional load (bladetwist) on the sawblade for a long bladelife
- Automatic electric guidearm adjustment
- Accurate mitre positioning
We are happy to help:

Technical data
KASTOmiwin A 4.6
Cutting range | |
---|---|
Form | |
90° | 14.18 / 18.11 x 14.18 / 14.18x 14.18 in
|
+ 45° | 14.18 / 13.39 x 13.39 / 13.39 x 13.39 in
|
+ 60° | 9.84/ 8.66 x 13.39 / 8.66 x 8.66 in
|
- 45° | 9.45 / 13.39 x 13.39 / 13.39 x 13.39 in
|
minimum remnant length (single / automatic) | 1.18 /< 7.87 |
Mass | |
---|---|
Length (1.500 mm infeed) x width x height | 155.5 x 129.92 x 76.77 in
|
Length (3.000 mm infeed) x width x height | 214.57 x 129.92 x 76.77 in
|
Material support height | 27.6 in
|
Performance characteristics | |
---|---|
Total power | 8.05 HP
|
Drive Power | 5.36 HP
|
Cutting speed | 472.44 - 5905.5 in/min
|
Dimensions of saw blade | 243.70 x 1.61 x 0.51 in
|
Dimensions of saw blade (optional) | 243.70 x 1.34 x 0.43 in
|
6.190 x 34 x 0,43 mm
| |
We reserve the right to make technical changes.