KASTOmicut U 4.6
| Saw type: | Bandsaw |
|---|---|
| Cutting option: | Straight and mitre cut |
| Automation: | Semi automatic |
| Materials: | Structural steels, Stainless steel, Tool steel |
| Material width: | 520 mm / 20.47 inch |
| Material height: | 335 mm / 13.19 inch |
Manual swiveling frame bandsaw
With the KASTOmicut U 4.6, users can even process flat material up to 520 mm wide. With this saw, the material is also clamped by means of a horizontal hydraulic vice. This simplifies handling and increases the output in the case of small batches. The continuously adjustable cutting speed lies between 12 and 150 metres per minute. Like the smaller models of the KASTOmicut range, mitre cuts from -45 to +60 degrees are possible. The mitre angle can also be continuously adjusted. A heavy and torsionally rigid welded structure for the saw frame provides extremely stable support for the saw blade, ensuring excellent cutting quality even with hard-to-machine materials.
Characteristics:
- Frequency-controlled infinitely saw drive
- Fully hydraulic saw feed control
- Linear-guided overrunning clamping device
- Infinitely adjustable mitre angle (90° to +60°)
- Infinitely variable saw blade arm adjustment
Downloads
KASTOmicut U 4.6 at the KASTOshop Asia Pacific
To the KASTOshopTechnical Data
| Cutting range 90° round | 335 mm | 13.19 in |
| Cutting range 90° flat (W x H) | 520 x 335 mm | 20.47 x 13.19 in |
| Cutting range 90° square | 335 x 335 / 335 x 335 mm | 13.19 x 13.19 / 13.19 x 13.19 in |
| Cutting range +/-45° round | 335 mm | 13.19 in |
| Cutting range +/-45° flat (W x H) | 390 x 335 mm | 15.35 x 13.19 in |
| Cutting range +/-45° square (W x H) | 335 x 300 mm | 13.19 x 11.81 in |
| Cutting range +60° round | 280 mm | 11.02 x 0 in |
| Cutting range +60° flat (W x H) | 260 x 335 mm | 10.24 x 13.19 in |
| Cutting range +60° square (W x H) | 260 x 260 mm | 10.24 x 10.24 in |
| Shortest remnant length | 30 mm | 1.18 in |
| Shortest cut-off length | 10 mm | 0.39 in |
| Smallest diameter to be cut | 10 mm | 0.39 in |
| Length | 855 mm | 33.66 in |
| Width | 2220 mm | 87.4 in |
| Height, saw head lowered position | 1240 mm | 48.82 in |
| Height, saw head in highest position | 1950 mm | 76.77 in |
| Material support height | 700 mm | 27.56 in |
| Total weight | 755 kg | 1664.49 lbm |
| Total power | 2 kW | 2.68 hp |
| Saw motor, power – frequency controlled | 1.5 kW | 2.01 hp |
| Cutting speed infinitely variable – frequency controlled | 20 - 110 m/min | 65.62 - 360.89 ft/min |
| Dimensions of saw blade | 3180 x 27 x 0.9 mm | 125.2 x 1.06 x 0.04 in |
| Saw blade guides | roller guide and back roller, replaceable | |
| Material clamping | mechanical | |
| Cutting feed | hydraulic, infinitely variable | |
| Saw blade tension | mechanical | |
| Saw blade cleaning | by synchronously running, easily replaceable wire brush |
