KASTOtec FC 4
KASTOtec FC 4
Fully hydraulic and automatic high-performance bandsawing machine of robust construction, with saw blade moving parallel in horizontal direction, for cutting of round, square and flat material, of tubes and profiles of all qualities, particularly for tool steels and material which is difficult to cut such as titanium, Hastelloy, Inconel etc.
- Sawband guide via hydraulically pretensioned carbide slideways
- Electronic monitoring of the hydraulic blade tension
- Infinitely variable cutting speed, to be adjusted at central control panel
- Fully automatic, rapid height adjustment of the saw unit via light barrier
- Hydraulic horizontal vices, clearance stroke is standard
430 x 430 / 430 x 430 / 430 mm
0 - 430 mm
Smallest dimension to be cut
10 x 10 mm
Shortest length of residual piece, single cut
Shortest remnant length in automatic operation, possible (only if the material has a perfect geometric surface)
Shortest cut-off length
Shortest remnant length in magazine operation with change of bar, possible only if the material has a perfect geometric surface
Smallest size to be cut in magazine operation with change of bar
20 x 20 mm
|Mass and height|
Length with material feed length 600 mm approx.
Length with material feed length 1500 mm approx.
Length with material feed length 3000 mm approx.
Width with chip conveyor approx.
Height (saw frame in lowest position) approx.
Height (saw frame in highest position) approx.
Total weight with material feed length 600 mm
Total weight with material feed length 1500 mm
Total weight with material feed length 3000 mm
Material support hight
Power of saw motor
Power at running wheel
Cutting speed infinitely variable
12 - 120 m/min
Material feed length, individual cut
Saw blade dimensions
6.830 x 41 x 1,3 mm
Saw blade dimensions option I
6.830 x 54 x 1,3 mm