News about the KASTO program

Universal bandsaw for straight and miter cutting tasks of tubes, profiles and solids. Standard version with

• Two cutting speeds, infinitely variable cutting speed as option
• Coolant system
• Horizontal clamping vise
• Infinitely variable miter adjustment from –45° to +60°
• Infinitely bandsaw arm adjustment
• Quick clamping measuring stop with measuring range 0 - 600 mm

Three versions: KASTObsm M 2, KASTObsm E 2 and KASTObsm U 2.

Manual/semi-automatic metal circular saw for straight and miter cuts. Standard equipment with

• Two cutting speeds
• Coolant unit
• Length measuring stop

Four manual versions: KASTOdisc M 4,
KASTOdisc M 6, KASTOdisc M 7, KASTOdisc M 10.
Two semi-automatic versions: KASTOdisc U 7, KASTOdisc U 10. Automatic version: KASTOdisc A 10.

The vertically working saw blade is the distinctive feature of the KASTOverto. The extremely compact design offers the positioning at smallest areas. Total machine enclosure, safety, cleanliness and low-noise cutting with best accessibility are further features of this modern sawing machine.

The fully automatic vertical bandsaw KASTOverto offers a wide range of power features:

• hydraulic cutting feed by pre-tensioned linear guide is standard
• frequency-controlled saw drive with infinitely adjustable cutting speed
• electrical monitoring of minimum RPM
• manual alignment of blade guidance to the material diameter
• wire brush driven proportionally to main drive
• KASTO BasicControl touch-screen control
• linear guided clamping jaws and feed unit
• safety, cleanliness and low-noise cutting with best accessibility
• extremely short remnants
• perfect, ergonomic working height

High-efficient cutting of solids and tubes on bandsawing machines is already a synonym for the KASTOtec-series. Due to intensive research in cooperation with well-knows manufacturers of cutting tools a further technology leap in metal cutting could be achieved: KASTO Performance Cutting (KPC) stands for optimum adjustment of machine tool building, machine tool technology and control engineering. KPC offers an increase in chip capacity subject to the material by more than 30 % at comparable or better blade life! Especially at high-efficient work environment depending on maximum speed and quality in cutting, KPC can provide its high potential. Therewith KPC can support the tendency of outsourcing sawing task to the steel centers by the metal-working industry in an optimal way.

The fully automatic bandsaw KASTOevo offers a wide range of features based on the principle of two-column-guiding. Heavy-duty, distortion-free steel tube construction with minimized vibration.   

• cutting feed by pre-tensioned linear guide is standard
• frequency-controlled saw drive with infinitely adjustable cutting speed
• electrical monitoring of minimum RPM
• BandControl
• synchronous alignment of blade guidance to the material diameter
• KASTO Universal Hydraulic UH for optimum adjustment to each cutting task by means of infinite choice between constant feed speed and constant cutting force
• wire brush driven proportionally to main drive

The models: KASTOevo 3x4, KASTOevo 4x5

Automatic high-performance bandsawing machine in gantry design for large material dimensions, slabs, ingot moulds, forged shafts, open-die forgings, marine crank shafts, shafts for turbines, large tools of all qualities and of material which is difficult to cut (e.g. titanium, Hasteloy, Inconel). The extremely robust design and the high rigidity of this large bandsaw guarantee good vibration absorption and herewith short cutting times. Many different design sizes and table lengths cover all fields of application. A wide variety of accessories completes the individual adaptation possibilities