KASTOnailmark

    • More pictures
    • 1
    • 2
    • +
    • Zoom

    The marking unit KASTOnailmark is located on the outfeed side of the machine. Suited to mark the front side of cut-pieces from a minimum height of 20 mm and a minimum width of 40 mm to remnant length of minimum 50 mm. Saw cuts up to a length of 300 mm are marked during the cut, saw cuts of more than 300 mm length are first marked and then cut.

    • Font Height from 1 to 30 mm

    • Marking field size 100 x 150 mm

    • Marking software integrated in machine control TechnoControl

    • Marking ability checked with order entry. This avoids downtimes in automatic operation.

    • Different marking parameters can be selected order-related.

    • +
    • Zoom

    Option: Same as above but marking unit is integrated in feed side of machine. Marks cut-pieces with a height of 20 mm and a width of 40 mm as well as a remnant length of at least 120 mm.